Gosafe G626, User Manual

Page: 16 / 26

Remarks Reply Command Ctrl Word Description Sr.
14
PRQ PRQ PRQ
3.13
Usage: send command to
device, the device will send
location information,
Information format is the same
as upload data by interval, and
this function can also be done
by calling to the device and
hang up after first ring.
Requests
location
information
"parameter2" (30 seconds),
the device s will regard the
vehicle as in moving status.
"40": sustained stop time.
Unit is second. This
parameter is used to judge
whether the vehicle statusis
shift from move status to
stop status. If the sensor
stops vibrating, which is 0
times/second and last for
"parameter3" (40 seconds),
the device will regard the
vehicle as in stop status.
Default : 10
；
10
；
255
SOP:100;120 SOP; 100;120 SOP
3.11
Speeding
alarm
parameters
100: Alert
120: Alarm
Default: SPO;80;100
MOT:0 MOT;0 MOT
3.12
Motion
sensor
enable and
disable
0: Close: shield the function
related to motion sensor. It
won't send any message. This
can't judge if the vehicle is in
motion status or static status.
1: Open; enable related
function of motion sensor.
Default: MOT;1
Note
The device will automatically send
location SMS to the user once it will
sense any movement. The device will
send only one SMS at the start of the
movement. Device will wait for the
vehicle to stop and will start the
counter to 60 min. If the movement
is after 60 min. device will again send
the SMS to the user mobile.