52
MDE-Radio-Timing-GTC-3080V2.3
►
After validation of the unit of
minute, the screen for deac-
tivation of relay is displayed,
indicating the same settings
as the previous screen. The
day of week or the tens of
hour flash.
►
Using the «
+
», «
-
» and «
EntER
» buttons, successively adjust the day or week’s
period, hour and minute of relay deactivation.
After validation of the unit of minutes, another screen for scheduling a new event
is displayed, indicating the same settings as the previous screen. The day of week
flashes.
►
Press the «
Back
» button to return to the relay choice o in case you want to switch
to another circuit.
☛
When a circuit does already have scheduled events, it is not possible
to change the programming mode (ON/OFF or PULSE). To do this, you first
need to completely erase the events of this circuit.
☛
In the «ON / OFF» mode, each «
On
» program step is automatically
followed by a «
OFF
» program step
☛
In the «ON / OFF» mode, when a week’s period is selected for activation,
the same week’s period is automatically applied to the deactivation (you can
no longer change the field of days on the deactivation screen)
☛
In the PULSE mode, the recording of an event is automatically done
after the validation of the unit of minute provided that: the scheduled
duration is more than 00 SEC and that the hour setting is coherent (<24)
☛
In the ON/OFF mode, the recording of an event is automatically done after
the validation of the unit of minute in the deactivation screen provided that: the
start time is different from the stop time and that the hour setting is coherent (<24)
☛
Before adding events to a circuit already programmed in ON / OFF
mode, please note precisely the existing programming in order to avoid
overlaps whose consequences could be unexpected activations or
deactivations.
☛
One program step is used by each pulse and two by each ON/OFF contact.
☛
Up to 128 program steps are available for each circuit.
SCHEDULING
AN EVENT
RELAY: C1 ON/OFF
C1= OFF MON 08:00
