background image

Instructions for use, mounting and connection

40

Built-in ceramic-glass cooktop

GB  IE  MT

Dear customer !

The built-in ceramic-glass cooktop is intended for
household use only.

Materials used for packaging are nature friendly
and may be recycled, deposited or destroyed
without any threats to the environment.
In order to recognize these features, all packing
materials are marked with relevant symbols.

Once your appliance has become obsolete and
you do not intend to use it any longer, take
adequate care not to litter the environment.
Deposit your old appliance with the authorized
depot dealing with used household appliances.

Instructions for use

Instructions for use have been prepared for the
user, and describe the particulars and handling of
the appliance. These instructions apply to
different models from the same family of
appliances, therefore you may find information
and descriptions that may not apply to your
particular appliance.

Installation instructions

The appliance should be connected to the power
supply in accordance with the instructions from
the chapter "Electrical connections" and in line
with the standing regulations and standards.
The connections should be carried out by a
qualified personnel only.

Rating plate

The rating plate with basic information is located
underneath the appliance.

Fire hazard protection

Appliances are allowed to be mounted on one
side next to a high kitchen cabinet, the height of
which may exceed that of the appliance. On the
opposite side however, only a kitchen cabinet of
equal height as the appliance is allowed.

Built-in ceramic-glass cooktop EN .............. 40
Important warnings ...................................... 41
Connection to the power supply .................. 41

Basic adjustment of sensors to the ambience
Installation diagram

Mounting the built-in cooktop ..................... 42

Caution !
Dimensions of the built-in hob opening
Installation procedure

Ceramic-glass cooktop .................................. 43
Cookware ....................................................... 44

Energy saving tips

Glass ceramic hob control elements ............ 45

Control panel
Control elements
Automatic cooking mode
Blocking the hob operation
Timer function

Limited time of operation
Safety functions and error display

Cooker controls.............................................. 52

Control panel

Control elements............................................ 53

Switching the hob on
Selecting the particular hotplate
Switching the hotplate on
Automatic cooking mode
Blocking the hob operation
Remaining heat indicators
Switching the entire hob off
Limited operation time
Power interruption
Safety warnings and error indication

Cleaning and maintenance of ceramic-glass
hob .................................................................. 56
Technical information................................... 57

Summary of Contents for SVK61TS



















Reviews: