Gorenje GT64AB1-236661, Instruction Manual

Page: 28 / 100

10) REPLACING THE INJECTORS
The burners can be adapted to different types of
gas by mounting injectors suited to the type of gas
in question. To do this, first remove the burner tops
using a wrench “B”. Now unscrew injector “A” (see
fig. 13) and fit a injector corresponding to the
utilized type of gas in its place.
It is advisable to strongly tighten the injector in
place.
After the injectors have been replaced, the
burners must be regulated as explained in
paragraphs 9. The technician must reset any
seals on the regulating or pre-regulating devices.
The envelope with the injectors and the labels
can be included in the kit, or at disposal to the
authorized customer Service Centre.
For the sake of convenience, the nominal rate table
also lists the heat inputs of the burners, the
diameter of the injectors and the working pressures
of the various types of gas.
BURNER ARRANGEMENT ON THE HOT PLATE
CONVERSIONS
TABLE
1 ULTRA RAPID
G 30 - BUTANE28 - 30 225 90 1400 3100
G 31 - PROPANE37 222 90 1400 3100
G 20 - NATURAL 20 295 121 Y 1400 3100
2 RAPID
G 30 - BUTANE28 - 30 204 83 750 2800
G 31 - PROPANE37 200 83 750 2800
G 20 - NATURAL 20 267 117 Y 750 2800
BURNERS
N° DESCRIPTION
GAS
NORMAL
PRESSURE
NORMAL
RATE
INJECTOR
DIAMETER
NOMINAL HEAT
INPUT (W)
mbar g/h l/h 1/100 mm Min. Max
4 SEMIRAPID
G 30 - BUTANE28 - 30 127 68 500 1750
LEFT BACK
G 31 - PROPANE37 125 68 500 1750
G 20 - NATURAL 20 167 98 Z 500 1750
5 AUXILIARY
G 30 - BUTANE28 - 30 73 51 400 1000
G 31 - PROPANE37 71 51 400 1000
G 20 - NATURAL 20 95 75 X 400 1000
3 SEMIRAPID
G 30 - BUTANE28 - 30 102 58 500 1400
RIGHT FRONT
G 31 - PROPANE37 100 58 500 1400
G 20 - NATURAL 20 133 85 Y 500 1400
28
FIG. 13