Gorenje GT64AB1-236661, Instruction Manual

Page: 21 / 100

CLEANING
IMPORTANT:
always disconnect the appliance from the gas
and electricity mains before carrying out any
cleaning operation.
2) HOT PLATE
Periodically wash the crystal hot plate, the
enamelled stell pan support, the enamelled burner
caps “C” and the burner heads “M” (see fig. 6) with
lukewarm soapy water. Following this, all parts
should be thoroughly rinsed and dried. Never
wash them while they are still warm and never use
abrasive powders. Do not allow vinegar, coffee,
milk, salted water, lemon or tomato juice from
remaining in contact with the enamelled surfaces
for long periods of time.
WARNINGS:
Comply with the following instructions, before
remounting the parts:
- check that burner head slots “M” (fig. 6) have
not become clogged by foreign bodies.
- Check that enamelled burner cap “C”(fig. 6)
have correctly positioned on the burner head.
It must be steady.
- Do not force the taps if they are difficult open
or close. Contact the technical assistance
service for repairs.
- Don’ t use steam jets for the equipment
cleaning.
FIG. 6
21