Gorenje EIT 2600 P2, Manual

Page: 7 / 20

137815
• After turning the ceramic glass hob on all displays come on for
a moment. The hob is ready for operation.
• The hob is fi tted with electronic sensors which are switched on
if you touch the relevant circle for at least one second.
• Each sensor activation is followed by a sound signal.
• Avoid placing any objects on sensor surface (possible error
signalization). Always keep the sensor surface clean.
Touch the ON/OFF sensor (A) for at least one second. The hob
is now active, and all hotplate power indicators (B) indicate »0«,
decimal dot (B1) is
fl ashing.
Now you need to select the next setting within 10
seconds, otherwise the hob switches off again.
After turning the hob on using the ON/OFF sensor (A), within the
next ten seconds start one of the hotplates.
• Touching the desired hotplate sensor (C), its relevant power
indicator indicates »0« and decimal dot (B1) is on.
• By touching sensors »+» (C) or »-« (E) set the desired cooking
power from 1 to 9.
Continuous pressing of »+» (C) or »-« (E) ssensor the
power level is automatically increased or reduced.
Another procedure is to change power in steps is by
intermediate touching of relevant sensors.
Setting is always possible for one hotplate only
at the time - the one with the decimal dot on (B1).
Power display indicates »0«, or „H“, depending on
the existing temperature of the hotplate (see Section
Remaining Heat Indicator).
You can also turn the hotplate off prior the end of
cooking and use the remaining heat, and save energy.
• Selected hotplate must be activated, decimal dot (B1) is on.
• Touching the hotplate sensor »-» (E) set the power level to
»0«. After 3 seconds the hotplate is turned off.
27
Hob control
Activating the hob
Turning hotplates off
Turning hotplates on