137815
The hob is equipped with the overheat safety sensors. When
they are activated they turn off the hotplates nearest to the
control board.
Error, possible cause, remedy
• Constant sound signal or Err 33
- Water is spilled over sensor surface (Wipe the sensor
surface)
• Flashing »H«
- Hot pan is placed above the sensor surface (Wait until
normal sensor temperature is regained.).
- Gaskets on heating elements are damaged. (Wait until
normal sensor temperature is regained.).
In case any other error signal is displayed, switch the
hob off immediately, disconnect it from the mains and
contact your nearest service center.
33
Safety functions and
error display
Summary of Contents for EIT 2600 P2
Page 19: ......
Page 20: ...SIVK 61 TS P2 137815 01 01 10...
