background image

PRODUCT SPECIFICATIONS

SAVE THIS  MANUAL

You will need this manual for the safety warnings and precautions, assembly, operating,
inspection, maintenance and cleaning procedures, parts list and assembly diagram.
Keep your invoice with this manual.  Write the invoice number on the inside of the front
cover.  Keep this manual and invoice in a safe and dry place for future reference.

IMPORTANT SAFETY INSTRUCTIONS

WARNING!

READ AND UNDERSTAND ALL INSTRUCTIONS

Failure to follow  all instructions listed below may result inserious injury.

SAVE THESE INSTRUCTIONS

WORK AREA

1.

Keep your viewing area clean and well lit.  Cluttered benches and dark areas
invite accidents.

SKU 92444         For technical questions, please call 1-800-444-3353         PAGE 2

UNPACKING

When unpacking, check to make sure all the parts shown on the Parts List on page 15
are included.  If any parts are missing or broken, please call Harbor Freight Tools at the
number shown on the cover of this manual as soon as possible.

GENERAL SAFETY RULES

Item

Description

Focal Length

900mm.

Focal Ratio

f/15.

Aperture

60mm.

Mount

Equatorial.

Accessories

20mm (45x) & 4mm (225x) Eyepieces (1.25”).
1.5x Image-Erecting Eyepiece (1.25”).
3x “Barlow” Lens (1.25”).
90

°

 Star Diagonal (1.25”).

Moon Filter.
5x24 Finder Scope.
Aluminum Tripod with Accessory Tray.
Screwdriver.

Scope Type

Refractor.

Scope Dimensions

53-1/2” Long x 2-1/2” Diameter (Tube).
4-1/8” Long x 3-5/8” Diameter (Objective Lens Housing).

Maximum Tripod Height

46-1/2” High (With Lens Tray).

Weight

11.2 Pounds.

Summary of Contents for 92444
















Reviews: