background image

Item

Description

Candle Power

500,000

Bulb Type

Quartz Halogen

Battery Charging Requirements

AC/DC Charging
8-10 Hours Charging Time

Battery Type

6V Sealed Lead Acid

Battery Life (When Fully
Charged)

30 Minutes Continuous Use

Transformer Cord Length

6’6”

Lighter Adapter Cord Length

5’2”

Lens Diameter

3-3/4”

Overall Dimensions

5-3/8” W x 8-1/2” L x 7-1/2” H

Weight

3.30 Lbs.

SPECIFICATIONS TABLE

SAVE THIS  MANUAL

You will need this manual for the safety warnings and precautions, operating,
inspection, maintenance, and cleaning procedures, parts list and assembly
diagram.  Keep your invoice with this manual.  Write the invoice number on the
inside of the front cover.  Keep this manual and invoice in a safe and dry place for
future reference.

GENERAL SAFETY WARNINGS AND PRECAUTIONS

1.

KEEP WORK AREA CLEAN AND DRY.  Cluttered, damp or wet work areas
invite injuries.

2.

KEEP CHILDREN AWAY FROM WORK AREA.  Do not allow children to handle
this product.

3.

STORE IDLE EQUIPMENT.  When not in use, tools and equipment should be
stored in a dry location to inhibit rust.  Always lock up tools and equipment and
keep out of reach of children.

4.

DO NOT USE THIS PRODUCT IF UNDER THE INFLUENCE OF ALCOHOL OR
DRUGS.  
Read warning labels on prescriptions to determine if your judgment or
reflexes are impaired while taking drugs.  If there is any doubt, do not attempt to
use this product.

5.

USE EYE PROTECTION.  Wear ANSI approved safety impact eye glasses when
using this product.  ANSI approved safety impact eye glasses are available from
Harbor Freight Tools.

SKU 45845

PAGE 2

Summary of Contents for 45845











Reviews: