4.
DO NOT ALLOW THE SPOTLIGHT TO BE EXPOSED TO FIRE OR HIGH
HEAT, AS THIS MAY RESULT IN THE BATTERY EXPLODING.
5.
DISCONNECT POWER. UNPLUG THE CHARGER WHEN THE SPOTLIGHT
IS NOT IN USE.
6.
DO NOT SUBMERGE THE SPOTLIGHT IN WATER OR OTHER LIQUIDS.
7.
NOTE: PERFORMANCE OF THIS TOOL (IF POWERED BY LINE VOLTAGE)
MAY VARY DEPENDING ON VARIATIONS IN LOCAL LINE VOLTAGE.
EXTENSION CORD USAGE MAY ALSO AFFECT TOOL PERFORMANCE.
8.
GROUNDING/VOLTAGE WARNING: Common household current is 110-120
volts. As long as the outlet used with the Spotlight is rated from 110-120V there
will be no complications using it with household receptacles. Plug the Spotlight
into a 110-120V properly ground outlet protected by a 15-Amp, duel element time
delay or circuit breaker. NEVER try to plug a 110-120V tool into a 220-240V
circuit, or serious complications and possible injury to the operator may occur.
9.
FOLLOW GUIDELINES FOR BATTERY (part #9) DISPOSAL. The Spotlight is
powered by a rechargeable Battery which will have a long life span. However,
when the Battery is no longer functioning, it should be removed from the Spot-
light and properly recycled. Many states require recycling. Contact your local
solid waste authority for information on recycling. Before disposing of the
Battery, wrap exposed terminals with heavy tape to prevent a shorting condition
which could cause fire and/or injury.
10.
WARNING: This product contains or produces a chemical known to the State of
California to cause cancer and birth defects (or other reproductive harm).
(California Health & Safety Code 25249.5 et seq.)
UNPACKING
When unpacking, check to make sure all parts shown on the Parts List and Assembly
Diagram (page 8) are included. If any parts are missing or broken, please call Harbor
Freight Tools at the number shown on the cover of this manual as soon as possible.
OPERATING INSTRUCTIONS
NOTE: For additional references to the parts listed below, refer to the Assembly
Diagram on page 8 of this manual
SKU 45845
PAGE 4
