GL-30064ST
Larson Electronics, LLC
Phone: (800) 369-6671
Fax: (903) 498-3364
www.larsonelectronics.com
1
of
2
LED Golight Stryker GL-30064ST Wireless Remote Control Spotlight w/
Handheld Remote
-
Permanent Mount
INSTRUCTION MANUAL
Thank you for your purchase of the Larson Electronics
GL-30064ST
.
WARNING:
READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.
CRITICAL SAFETY INSTRUCTIONS:
•
INSTALLATION SHOULD ONLY BE CONDUCTED BY A QUALIFIED ELECTRICIAN IN ACCORDANCE WITH NEC AND ANY
RELEVANT LOCAL BUILDING CODES.
•
RISK OF FIRE OR ELECTRIC SHOCK. FIXTURE INSTALLATION REQUIRES KNOWLEDGE OF
FIXTURE'S
ELECTRICAL
SYSTEMS. IF NOT QUALIFIED, CONTACT A QUALIFIED ELECTRICIAN.
•
BE CERTAIN ELECTRICAL POWER IS OFF BEFORE AND DURING INSTALLATION AND MAINTENANCE.
•
MAKE SURE THE SUPPLY VOLTAGE IS THE SAME AS THE
FIXTURE'S
RATED VOLTAGE.
•
TO PREVENT WIRING DAMAGE OR ABRASION, DO NOT EXPOSE WIRING TO EDGES OF SHEET METAL OR SHARP
OBJECTS. SUITABLE FOR DAMP LOCATIONS.
IMPORTANT
READ CAREFULLY BEFORE INSTALLING THIS FIXTURE. SAVE THESE INSTRUCTIONS FOR FUTURE
REFERENCE. THE
GL-30064ST
MUST BE WIRED IN ACCORDANCE WITH NATIONAL ELECTRICAL CODE AND
ALL APPLICABLE LOCAL CODES. PROPER GROUNDING IS REQUIRED FOR SAFETY.
WE STRONGLY ENCOURAGE ONLY A LICENSED ELECTRICIAN INSTALL, OPERATE AND MAINTAIN THIS
PRODUCT. IF YOU ARE NOT QUALIFIED OR UNFAMILIAR WITH ANY ASPECT OF THIS INSTRUCTION SHEET,
CONSULT AN ELECTRICIAN. THERE ARE NO SERVICEABLE PARTS INSIDE.
WARNING:
MAKE SURE POWER IS TURNED
OFF
BEFORE STARTING THE
INSTALLATION OR PERFORMING ANY MAINTENANCE.
RISK OF FIRE/ELECTRIC SHOCK –
DISCONNECT POWER AT BREAKER BEFORE INSTALLING OR SERVICING.
RISK OF PERSONAL INJURY –
FIXTURE MAY BECOME UNSTABLE OR DAMAGED IF NOT INSTALLED PROPERLY.
RISK OF BURN –
ALLOW FIXTURE TO COOL BEFORE SERVICING.
The Larson Electronics GL-30064ST Golight LED Stryker offers powerful illumination and wireless remote functionality in rugged work
sites. This 40-watt light features 10 high flux LEDs and a P-Vex lens. During use, the unit provides up to 544,000 candela output that is
capable of illuminating targets up to 4,839 feet away. Operators can mount the UV and saltwater resistant LED light using an included
stainless steel bracket.
Low Voltage DC
Connect power to power supply outputting low voltage between 9-42 Volts DC.
This variable voltage allows greater versatility without affecting light output. Ensure
deutsch connectors are properly connected (If applicable)
REMOTE OPERATION
Remote control functions include on/off, home and 4 buttons which control up, down, left and right movement. The light will
continue movement as long as the buttons are pressed. Releasing the buttons stops movement and holds the Golight in
position. A fast and slow mode button (turtle/hare) controls the speed of the motor while the pan and tilt function buttons are
depressed. Holding the button for 12 seconds in fast mode results in a full 370 degree rotation, and 8 seconds for full tilt.
Slow mode is used for pinpoint accuracy at distance and is approximately 35 seconds for full rotation and 20 seconds for
one full range of tilt. Simultaneous pan + tilt is possible. An included on-command return function automatically brings the
unit to 0° home.
POWER
This light operates with 12 volts DC and draws 3.7 amps, making it ideal for vehicles, boats, ATVs, and similar sources of
12 volt direct current.
MOUNTING
The light is permanently mounted using an included stainless steel mounting bracket.
