sysTeM PoWer
11
Contact Gorbel Medical
| Phone: 1-844-846-8744 | E-mail: [email protected]
System Power
This section provides an overview of the SafeGait 360° Balance and
Mobility Trainer power components and procedures for powering the
system on and off under both normal and emergency conditions.
Overview
The facility power panel provides power to the ceiling-mounted rail,
actuator, router, and NAS device.
Facility Power Panel
Power On the System
1. At the facility power panel, press the green POWER ON button.
The
POWER ON
button lights up. After approximately one minute, the LED status light bar on the actuator
blinks white, indicating that the actuator is powering up and performing self-checks. When the LED status
light bar changes to solid white, the system has properly powered up and is in Stop mode, waiting for
network connection to the kiosk. Stop mode prevents the actuator from moving until it is disengaged by a
command from the kiosk or handheld remote control.
•
Controls
1. EMERGENCY STOP
2. POWER ON
3. OFF
4. RESET
•
Indicators:
◉
POWER ON (2)
