GORBEL safeGait 360 Page 10 Instructions For Use Manual Download

Page: 10 / 90

sysTeM coMPoNeNTs

SafeGait 360° Balance and Mobility Trainer |

Instructions for Use | SG360-IFU-004 Rev B

Spreader Bar / Spreader Bar Cover

The spreader bar connects the actuator strap to the patient

harness. The spreader bar has two sets of attachment points

to accommodate patients of varying body types.

The SafeGait 360 Balance and Mobility Trainer must be used

with the SafeGait 360 spreader bar.

Spreader

Bar

caUTIoN:

Using a non-SafeGait spreader bar can result in injury.

Harness

The SafeGait EMBRACE Rehabilitation Harness is recommended for use with

the SafeGait 360° Balance and Mobility Trainer.

After it is placed onto the patient, the harness is connected to the spreader

bar. For additional information, refer to the SafeGait EMBRACE Rehabilita

tion Harness Instructions for Use.

Harness

Summary of Contents for safeGait 360



























































































Search results

Summary of Contents for safeGait 360

Reviews:

Related manuals for safeGait 360

Brands by name

Popular brands

GORBEL safeGait 360, Instructions For Use Manual

Search results

Summary of Contents for safeGait 360

Reviews:

Related manuals for safeGait 360

Brands by name

Popular brands