11.
RUNNING BELT ADJUSTMENT
(1) Running belt deviate to left
Start the machine by speed at 2-3KM/H without loading, use Allen wrench to screw the bolt 1/4 turn
clockwise (see fig1). Keep the machine running without loading for 1-2 minutes to gauge. Repeat the
previous step if more adjustment is needed, until the belt moves to the center.
(2) Running belt deviate to right
Start the machine by speed at 2-3KM/H without loading, use Allen wrench screw the bolt 1/4 turn
clockwise (see fig2). Keep the machine running without loading for 1-2 minutes to gauge. Repeat the
previous step if more adjustment is needed, until the belt moves to the center.
(3) Running belt slipping
If the running surface becomes slipping, tighten bolts on both ends 1/2 turn clockwise (see fig3)
with Allen key. Repeat if necessary until the belt is properly adjusted.
(3) Running belt logjam
If the running belt is in dead condition, loosen bolts Allen wrench to make the screw 1/2 circle both
left and right till this logjam solved.
Summary of Contents for SP36602
Page 1: ...USER S MANUAL MOTORIZED TREADMILL SP36602...
Page 3: ......
