Running belt adjustment guide
*The running belt needs to be adjusted once the running belt is loosened or cannot be kept in the right
position (move to the right or left side).
1. Turn the power switch on.
2. Increase the speed to 4 Km/Hr, and keep it working for 2-3 minutes, then start to adjust.
If the running belt moves to left side If the running belt moves to right If the running belt is loose,
please use attached 5mm wrench side, please use attached 5mm please use attached 5mm
fastening the left side screw in wrench fastening the left side wrench fastening the left
clockwise. Turn ¼ turn each time screw in anticlockwise. Turn ¼ and right side screw in
until the running belt moves and turn each time until the running clockwise. Turn ¼ turn each
stays in the middle. belt moves and stays in the time until the running belt is
middle. not loose and stays in the
middle.
Rear rubber feet adjustment
If the floor is not flat, adjust the rubber feet
Counter clockwise turning until the whole
machine is stable.
Folding & storage – for PR710F & PR720F only
(Step 1) (Step 2)
Lift up the frame from rear side with both hands Put lock pin from B into position A
