Remote control instruction manual
Remote control button key illustration
Name
Definition
1
Red LED Light
Infrared signal light.
2
[ RESET ]
Will stop unit in any situation, and go back to set
up mode
3
LCD Window
Time: count up/down 00-99 Min.
Speed: up/down 00.0-99.9 Km/H
(Imperial system unit will not show)
4
IR transmitter
For Infrared ray transmittance
5
[ TM ]
Press to set up time
6
[ CLR ]
Clear wrong time setting, and back to set up
mode
7
[ START ]
Treadmill starts to work
8
[ STOP ]
Push the [STOP] key, the unit will stop working
and go back to set up model (Need to wait 3-6
seconds for long beep sound, then push the
[START] to re-start)
9
[ MODE ]
Speed / Distance display exchange
10
[ SPD ]
Speed setting
11
[ S.KEY ]
Push [S.KEY] + [MODE] for channel set up.
Electric Saving Mode
The LCD display will switch to Electric Saving
Mode under any mode if not operated over 1
minute, push [RESET] key to go back to the
normal display.
Battery Box
1.5V Alkaline Battery x 2 pcs
Infrared ray receiving zone
* Pantoscopic IR receiving angle,
Achieved 180° both left
And right side.
