Gopel Electronic G CAR 6282, Manual

Page: 18 / 34

CHAP
TER
3.
TECHNICAL
DESCRIP
TION
GÖPEL
electr
onic
GmbH
3.4.2 Pin Assignment
An ODU connector is provided for connecting the communication interfaces (see next page). The table is designed so that the table rows and columns correspond exactly to the
pin matrix of the ODU.
Table 3.4: Pin assignment matrix of the ODU connector
A B C D E F G H I K
12 Analog_OUT7 Analog_OUT8 Analog_IN1 Analog_IN2 Analog_IN3 Analog_IN4 Analog_IN5 Analog_IN6 Analog_IN7 Analog_IN8
11 UBAT_TRV_9-12 UBAT_TRV_1-8 UBAT_ADIO GND_A_OUT Analog_OUT1 Analog_OUT2 Analog_OUT3 Analog_OUT4 Analog_OUT5 Analog_OUT6
10 GND SYNC_CLK_OUT SYNC SYNC_CLK_IN GND GND GND GND GND GND_A_IN
9 TRV_Slot17_P TRV_Slot17_N TRV_Slot18_P TRV_Slot18_N ExtC_0_P ExtC_0_N ExtC_1_P ExtC_1_N ExtC_2_P ExtC_2_N
8 reserved_0 reserved_1 reserved_2 reserved_3 reserved_4 reserved_5 reserved_6 reserved_7 reserved_8 reserved_9
7 TRV_Slot12_H TRV_Slot12_L TRV_Slot13_H TRV_Slot13_L TRV_Slot14_H TRV_Slot14_L TRV_Slot15_H TRV_Slot15_L TRV_Slot16_H TRV_Slot16_L
6 TRV_Slot7_H TRV_Slot7_L TRV_Slot8_H TRV_Slot8_L TRV_Slot9_H TRV_Slot9_L TRV_Slot10_H TRV_Slot10_L TRV_Slot11_H TRV_Slot11_L
5 GND GND GND reserved TRV_Slot4_H TRV_Slot4_L TRV_Slot5_H TRV_Slot5_L TRV_Slot6_H TRV_Slot6_L
4 Digital_IN14 Digital_IN15 Digital_IN16 GND TRV_Slot1_H TRV_Slot1_L TRV_Slot2_H TRV_Slot2_L TRV_Slot3_H TRV_Slot3_L
3 Digital_IN4 Digital_IN5 Digital_IN6 Digital_IN7 Digital_IN8 Digital_IN9 Digital_IN10 Digital_IN11 Digital_IN12 Digital_IN13
2 Digital_OUT11 Digital_OUT12 Digital_OUT13 Digital_OUT14 Digital_OUT15 Digital_OUT16 GND Digital_IN1 Digital_IN2 Digital_IN3
1 Digital_OUT1 Digital_OUT2 Digital_OUT3 Digital_OUT4 Digital_OUT5 Digital_OUT6 Digital_OUT7 Digital_OUT8 Digital_OUT9 Digital_OUT10
Always short the ground signals GND, GND_A_IN and GND_A_OUT close to the DUT.
Some pins of the connector are labeled ”TRV_Slot”. Here the signals of the Automotive Bus interfaces are led out. Depending on which transceiver or which bus interface is placed
on the corresponding slot, the communication signals are placed on the corresponding TRV_Slot pins.
G
CAR
6282
13