<
6
>
If the computer is used in an environment where the lightning protection
facilities are poor or not, turn off the power and remove the power cord,
network cable, and telephone line connected to the computer in a
thunderstorm.
Please use genuine operating system and software and configure it correctly.
Gooxi Technology Co., Ltd. does not assume maintenance responsibility for
server failures caused by operating systems and software.
Please do not disassemble the chassis and increase or decrease the server
hardware configuration. Gooxi Technology Co., Ltd. is not responsible for the
hardware and data damage caused by this.
When a server fails, first check the Troubleshooting section of this manual to
identify and troubleshoot common problems. If you cannot determine the
cause of the problem, contact the Gooxi Technology Support Department
immediately for assistance.
Choosing a suitable environment for the computer helps the computer run
stably and can extend the life of the computer.
Gooxi Technology Co., Ltd. reserves the right of final interpretation of the above terms and
conditions
1.5 Other important description
"If the device is marked with an identifier, it means that the device affixed with
this identifier is designed and evaluated only at an altitude of 2000m.
Therefore, it is only suitable for safe use below 2000m. When it is used
above 2000m, there may be a safety hazard."
“If this device is marked with this symbol, it means that the device affixed with
this symbol is only designed and evaluated for safety in non-tropical climate
conditions. Therefore, it is only applicable to the safe use of non-tropical
climatic conditions and may be safe when used in tropical climate conditions.
Hidden trouble."
Summary of Contents for Purley Platform 1U
