Google Pixel 6 Pro, Service Manual

Page: 37 / 172

Google 2021 | Confidential and Proprietary | Do not distribute 37
09. Separate Top/Right/Left edge
10. Separate bottom edge
● Insert an
ESD pick (3.5mm) into the gap to
separate the top side.
● Then slide around the right side and left side.
● Separate the bottom edge with the
ESD pick(3.5mm)
inserted at an approximately 75 degree.
● º angle and slide horizontally, as shown above.
D
is
pl
ay
Bottom edge
Do not insert the pick horizontally, insert at 75º and keep the
ESD pick at that angle.
Approximately
75 degree
Top
edge
Left
Side
Right
Side
Insert and keep pulling the gap horizontally.
Bottom spe
aker
Mic Logic bo
ard
Battery Front ca
mera
Top
Speaker
Rear ca
mera
Upper mid-f
rame
mmWave Mid-frame Graphic sh
eet
Display
2mm
2mm
3.5mm
2mm
2mm
3.5mm