RAM PRO XL 0321
7
Chemical Dispenser
•
Unscrew cap
•
Remove cup and
dump remaining
water in cup – The
purpose of the cup is
to remove water so
new tablets will not
displace remaining
water in the chamber
onto the machine.
•
If the cap will not
unscrew, wait a few
seconds for pressure
to bleed from flexible
shaft – At running
pressure of about
35 psi there is about
500 lbs pushing up
on cap and it will not
unscrew.
•
Place tablet in cup
•
Screw cap on just to
snug – Do NOT over
tighten – cap will be
hard to remove.
Roll Cage/Handle
•
To roll the RAM-PRO-XL using the build-in dolly wheels, swing the handle out
until it stops.
•
To stow the handle, push down until handle is flush with roll cage.
(1)
(2)
