GOODRICH Stormscope Series II, Installation Manual, Page: 40 / 65

WX-950
Installation Manual
3-3
Rev. C
3. If a fault is detected, an error message will be displayed indicating which test failed and which
functions may be inoperative.
a. If continued operation is possible, the message “ Press any key to continue ” will appear (see
figure 3-4). To continue operation, press any key.
Figure 3-4. Recoverable Error Message
b. If a fatal (i.e., non-recoverable) error is detected, the message “ Continued operation is not
possible ” will appear (see figure 3-5). In this circumstance, turn the system OFF and refer to
the maintenance procedures detailed in chapter 4.
Figure 3-5. Fatal Error Message
Table 4-1 lists all the possible error messages, the probable causes, and the recommended actions.