- 22 -
Other Features
TV Status
Programme Number
,
Programme Name
(or
AV
) and
Sound Indicator
are displayed on the left upper side
of the screen for 3 seconds when a new programme is
entered by a digit button or when
P<P
,
P+
/
P-
,
TV/
DTV
buttons are pressed.
Programme Swap (P<P)
This button is used to reenter to the preceding entered
programme again. Pressing
P<P
consecutively allows
to swap between two programmes.
Double-digit (- -)
is displayed when the "Double-Digit" button is
pressed.
After this, you can enter a programme by pressing two
digit buttons consecutively. If you do not press a but-
ton within 3 seconds this function will be ignored and
the display will be erased. Likewise, you must enter
the second digit within 3 seconds of entering the first
digit.
Sound Indicator
This indicator is displayed under the programme num-
ber indicator on the screen.
I-II
button is used to se-
lect Mono, Stereo, Dual-I or Dual-II.
In Mono broadcast or in forced-mono (for stereo broad-
cast),
In Stereo broadcast,
If dual broadcast is detected, Dual-I is selected in de-
fault.
'8$/,
Dual-II is selected by Remote Control.
Zoom
By pressing
(TXT_UPDATE) button (if Teletext is
not active) the zoom mode can be changed to AUTO,
4:3, 16:9, CINEMA, SUBTITLE, ZOOM or PAN-
ORAMA.
Mute Indicator
It is placed on the upper middle of the screen when
enabled, and it stays there until it is disabled.
To cancel mute, there are two alternatives; the first one
is pressing the " " button, thus volume is set to the
preceding value, and the second one is increasing the
volume level, thus it starts from the minimum level to
increase. By decreasing the volume level in mute state,
mute will not be ignored, only the volume level will de-
crease. If mute is canceled after decreasing the volume
level, the volume will be valid with the decreased level.
Volume Bar
It is displayed on the lower middle of the screen when a
volume button is pressed (Volume buttons
on Remote
Control or Front panel).
AV Modes
By pressing the
AV
button you can switch your TV to
AV modes (except being in Teletext). Pressing this but-
ton will switch the TV in one of the optional AV modes:
EXT1, EXT2, EXT2S or FAV. EXT2 supports the S-Video
mode.
In order to quit the AV mode press the
TV/DTV
, digit
buttons or
P+
/
P-
.
Teletext
Teletext is an information system that displays text on
your TV screen. Using the Teletext information system
you can view a page of information on a subject that is
available in the list of contents (index).
On screen display is not available in text mode.
Contrast, brightness or colour control is not available,
but volume control is available in text mode.
To operate Teletext
Select a TV station on which Teletext is being trans-
mitted.
Press
TEXT
button. Usually the list of contents (in-
dex) is displayed on the screen.
79
$9
7(;7
'79
:,'(
(;,7
*8,'(
,1)2
68%7
,,,
50077138-2816W-2147UK-ENG-STEREO-CLED-AK49 IDTV.p65
14.10.2005, 16:19
22
