Goodmans GTV69RFDT, User Manual

Page: 23 / 31

- 20 -
Tuning Mode
Selecting Channel
• Press or button to select “ Tuning Mode ”. By
pressing or button , you can select the mode in
which you want the search to be made, “ Channel ”
mode or “ Frequency ” mode.
When you select “ Channel ” the display of the Installa-
tion Menu will be as below :
352*5$00(
%$1'
&+$11(/
'(&2'(5
),1(781,1*
6($5&+
781,1*02'(
6725(
&
&+$11(/
Selecting Programme
To select programme number, you can use or but-
ton or Digit Buttons.
Selecting Band
BAND, can be selected either “C” or “S” by pressing
or button.
Selecting Channel
CHANNEL can be changed by or button or Digit
Buttons.
For band C,
01 - 17, 21 - 73
For band S,
01 - 41
Selecting Decoder
You can use this mode to connect any decoder to your
TV.
• Press the or button to turn it ON or OFF.
When you switch Decoder OFF, EXT2 output will be
muted. If it is switched ON the EXT-2 output will be the
selected video source. Any decoder can be connected
to EXT2 to unscramble required video signal.
Decoder setting should be stored separately for each
programme.
Selecting Fine Tuning
You can use the Fine Tuning process for fine adjust-
ment (after coarse adjustment), if you are not happy
with the image on the screen.
Use or button on
FINE TUNING item, until getting
the best image on the screen.
In Channel option, normally the Fine Tuning cursor is
placed at the middle on the slider, and this is indicated
with two reciprocal arrows.
Selecting Search
• Using or button select Search item.
• Press or button in order to start channel search.
“ SEARCHING... ” is displayed during the search process.
Searching is stopped as soon as a station is found or
, , , buttons are pressed.
To Store Settings
Press or button on STORE option to store Instal-
lation menu settings.
Selecting Frequency
• When you select Tuning Mode as “ Frequency ”, the
display of the Installation menu will be as below :
352*5$00(
)5(48(1&<
'(&2'(5
6($5&+
781,1*02'(
6725(
0K]
)5(48(1&<
Installation menu settings for “Frequency” mode are
identical to “Channel” mode except the Frequency ad-
justment.
Selecting Frequency
FREQUENCY can be changed by or button or the
Digit buttons.
Programme Menu
• To enter Programme menu directly, press the INFO
button, or
• Press “ MENU ” button, now you are in MENU . In the
MENU , select PROGRAMME using or button.
Then enter the Programme menu by pressing or
button.
50077138-2816W-2147UK-ENG-STEREO-CLED-AK49 IDTV.p65 14.10.2005, 16:19 20