Goodmans GTV27WLCD, Instruction Manual

Page: 42 / 48

36
1
1
3
3
.
.
O
O
T
T
H
H
E
E
R
R
F
F
U
U
N
N
C
C
T
T
I
I
O
O
N
N
S
S
1. To use “ Channel up/down “ on the unit control panel as function buttons
-When you press “ MENU “ to go enter menu, “ CH up/down “ will become the
up/down function control buttons.
2. TO use “ VOL+ / - “ as level control buttons
-When you press “ MENU “ to go into the sub control bar, then the level can be
adjusted by the “ VOL+ / - “ buttons.
3. To use “ VOL + / - “ as Mute control buttons
-When you press both “ VOL+ “ and “ VOL- “ buttons on the upper control panel
simultaneously, the sound will be muted.
-If you need to switch on the sound again, then either press “ MUTE “ button on
the remote control unit or press “ VOL+ “ or “ VOL- “ button on the remote control
unit or on the LCDTV itself.
4.“ Aspect “ button (Screen Aspect Ratio)
ARC - Aspect Ratio Control
* Normal: This sets the aspect ration to 4:3 for traditional TV programmes.
There will be black bars at either side of the screen.
* Panscan: Expands 4:3 video sources to fit the 16:9 screen by magnifying the
image at the edges of the screen. This creates less distortion at the center of
the screen.
* Zoom: Some DVD movies may not fill the top and bottom of the screen. The
zoom function extends the height to fill the screen.
* Full: This mode expands the width of 4:3 video sources evenly to fill the 16:9
screen. There will be distortion at the center of the screen as well as the edges.
5. “ APC “control button (Automatic Picture Control)
- Press “ APC “ button on the remote control repeatedly to cycle through the APC
settings. These settings are “Normal“, “Clear“or “Dark“. For example, when the
screen is showing night scene or darker screen, you can use APC to change
the screen to “Clear“ and get a brighter picture. If the screen is too bright, you
can use this APC button to change the screen to “Normal“ or “Dark“.