5
About This User Guide
Note: Before attempting to connect, operate or adjust this product, please save and read
this
User Guide
completely.
User Guide
User Guide
Thank you
for buying this product. Instructions in this
User Guide
describe mainly the use of the
User Guide
User Guide
remote control. Buttons with the same or similar marking on product itself, have the same functions
as those of the remote control. For introduction to the panels, buttons (Remote Control), and various
connections, please refer to the
Quick Guide
.
To turn on the DVD player, press
Power
on the top panel of the player.
To switch the unit to Stand-by mode, press
Power
on the remote control. To resume
to Play mode, press
Power
again.
When turning on the DVD Player, the unit directly enters “TV Tuner” Mode.
If a disc is already placed on the disc tray, the player will start to load the disc right after power
is turned on.
To switch to other modes, please do the following:
If there is no disc placed in the player, press
Mode
to toggle through different modes.
If there is a disc placed in the player, press
Stop
twice to completely stop DVD playback.
Press
Mode
to toggle through different modes.
When pressing
Stop
once during DVD playback, the player enters a pre-stop status and
memorises the position where the playback is stopped. To start play from where the playback
has been stopped, press
Play
.
Press
Stop
twice to completely stop playback.
If an “
INVALID KEY” appears on the left top corner of the screen, it indicates that the
action is not available.
r
r
r
r
r
1.
2.
r
r
r
