12
D
VD+R /R
W
Re
cor
de
r
RW
DD
4. Connect to a camcorder etc. by a video/s-video/DV IN.
To copy camcorder recordings, you can use the front sockets .These
scokets are located behind the flap on the left hand side .
n
Best picture Quality( Configuration A)
If you have a DV or digital 8 camcorder , connect the DV IN of the
DVD recorder to the appropriate DV output on the Camcorder.
n
Very good picture Quality (Configuration B+D)
If you have H18 or S-VHS (c) camcorder , connect the S-Video 2
of the DVD recorder to the S-VHS output on the camcorder.
you must aslo connect the audio input L AUDIO R on the
DVDrecorder to Audio output on the camcorder.
n
Good picture Quality(Configuration C+D)
If your camcorder only have a single Video output
(compositeVideo , CVBS) , connect the Video(AV 2) of the DVD
recorder to the Video output on the camcorder.
you must aslo connect the audio input L AUDIO R on the
DVDrecorder to Audio output on the camcorder.
Connect your DVD recorder to VCR or
★
a similar recording equipment
You can use this unit as the source player or as the recording
deck.
Connection for recording from other equipment
You can connect additional devises such as decorders, camcorders,
etc. to the S-video /Video/component and Audio in , then you can see
the picture from the additional device on your TV set. At the same
time , you can record the program from the additional device .
1. Connect to the AV IN by a video cable.(configuration A+D)
2. Connect to the AV IN by a s-video cable.(configuration B+D)
3. Connect with component video cable.(configuration C+D)
C
A
B
Basic Connection
Note:
Scart cable supplied. All other cables shown are not
supplied. These cables may be purchased from most hifi /
electrical stockists.
A
C
B
D
