35
Advanced Operation (continued)
3
Highlight the YES button with the LEFT or RIGHT key and press SELECT to
erase all the channels and settings, the unit will then reset and can be installed
following the instructions given in
.
"section 1-PREPARATION tuning in"
Add Channels
The GDB8 receiver can search for channels automatically (searching all the
broadcast frequencies for free-to-air channels) or manually (searching one
specified broadcast frequency only for any channels to be found there).
Press the MENU key to display the main menu and using the UP or DOWN keys,
Highlight the settings line and press SELECT to display the settings menu.
Highlight the installation line and press DOWN key to display the options. Select
automatic search with the UP or DOWN keys and press SELECT. A warning
message is displayed. This starts the automatic tuning process as described in
section
, and searches through all the
available broadcast frequencies for free-to-air channels. Previous channel will
be replaced on automatic search.
in “section 1-PREPARATION tuning in”
Highlight the YES button with the
LEFT or RIGHT key and press
SELECT to start the automatic
search.
If, alternatively, from the search
options menu the manual search
line is highlighted and SELECT
pressed, the manual search screen
is displayed.
To reset the receiver, highlight the “First
Time Installation” line in the menu and press
SELECT. A warning screen is displayed in
case of accidental operation.
First time installation