14
Everyday Operation (continued)
2
Hint
Not all channels broadcast the
programme data; if the name and
times of the programme is not
available then “not available” is
displayed in the information
banner.
If the channel selected is locked (see
section 3 advanced operation channel
protection), you must enter the correct
four digit code to view the channel.
Alternatively, the Prog+ or Prog- keys
can be used to move to another,
unlocked channel.
The information banner gives a number
of facts on the channel selected and the
programmes on it. The name of the
channel is displayed, along with its
channel list number and an indication of
the strength of the signal received on this
channel. The name, starting time and
ending time of the currently showing and
next programmes are also shown along
with the current time. There is also an
icon that indicates whether this channel
is a TV channel
, a radio channel
Or if the channel is only has DIGITAL
TELETEXT
.
Whenever you change channel, using the Prog + and Prog - keys or the number
keys, the receiver displays the channel picture along with an information banner
at the bottom of the screen. This will remain on the screen for approximately
three seconds. The information banner can also be displayed at any time while
watching TV by pressing the i key on the remote control. Pressing the i key
again removes the banner.
Information banner
