PRISM
4 Features
LISTENING TO RADIO
4.1 Tune the radio
To enhance radio reception ability ,extend the FM antenna.
1.
2. Adjust the volume by or to the desired level.
3. If you would like to perform manual scanning, you can press
and button to fine tune the station by 0.05MHz step, or you can
press and hold the and button to scan
next or previous available stations.
4.2 Store a favourite station
1. Tune to the station you want to store.
3. Press and hold . “P01” blinks on the screen.
4. Press or to select a preset number.
5. Press to save it.
6. Repeat steps 1-5 to store other stations.
This unit can store 10 presets.
4.3 Recall a favourite station
1. Press . “P01” blinks on the screen.
2. Press or to select a preset number.
3. Press to confirm.
4.4 Setting the Alarm and Alarm Mode
1. In standby mode, Press and hold the until the numbers flash.
Press once to turn on the radio.
Note: - To set a second alarm follow the same instructions using .
- To turn off alarm, or change alarm type at any time, use steps 3 & 4 .
3.5 TO SET ALARM 1
1. Press and hold the until the numbers flash.
2. Press the HR. and MIN to set the hours and minutes.
3.
Press the then press the or to select whether the alarm will
use the buzzer (bb) or the FM radio (frequency shown).
4. Press the to confirm the selection. The Alarm 1 indicator which
is on the face of the unit lights up.
2. Press the HR. and MIN to set the hours and minutes.
3. Press the then press the or to select whether the alarm will
use the buzzer (bb) or the FM radio (frequency shown).
4. Press the to confirm the selection. The Alarm 1 indicator which
is on the face of the unit lights up.
