PRISM
2.
Alarm stop
Press or . The alarm 1 will sound again the next day at the same time.
3. Alarm Cancellation
In standby mode, press and use or to select OFF to cancel the
alarm permanently.
Note: Same procedure applies for alarm 2 with button
4.6 Sleep Function
To fall asleep with the radio , Press turn on the radio then press to select
120-90-60-30-15-10 or 5 minutes of listening. Indicator lights up. The unit will
automatically turn off after the specified time. To cancel the sleep function,
repeatedly press button until “OFF” display or Long press button until indicator
lights off.
4.7 NAP Function
This function wakes you up after a short period of time. Only the buzzer
may be selected.
1. In standby mode, press to select 120-90-60-30-15-10 or 5 minutes for
your nap. The indicator lights nap.
2. To stop the alarm, press or .
3. To cancel the function, press repeatedly until OFF is displayed.
4.8 Dimmer
Press Snooze/Dimmer button to select the brightness of the screen: high or low
4.9 USB Charge out
You can charge your devices via the USB1 and USB2 socket.
( USB charging for most smartphones)
4.5 Stopping the alarm
1. Alarm repetition
Press SNOOZE. The alarm stops and will sound again 9 minutes later.
The alarm indicator will flash.
Note:
- Same procedure applies for alarm 2 with button.
- If you wake up with the radio, select your desired station,
then long press Button to turn off the radio . For the station
selecting, please refer to “LISTENING TO RADIO”.
- The previous level of listening is stored, the volume of the alarm will be
identical. If you wake up with the radio, do not forget to check the volume
level. Press and or then press again .
- If you use the sleep mode with low sound level, you should use the
buzzer to wake you up.
- To turn off alarm, or change alarm type at any time, use steps 3 & 4
