AUDIO OPERATION
Briefly Press the “SEL” button to access the Audio Menu. Use the SEL button to toggle
between the various available menu options and the Volume buttons to change the values of
each setting.
The unit will automatically return to the previous mode 5 seconds after the last button is
pressed.
Audio Menu
VOLUME (Volume Level)
Use the volume buttons to adjust the volume Up/Down. The LCD will show the current
volume level as a number between 00 (lowest) and 46 (highest).
SUBWOOFER (Sub-woofer Level)
The Subwoofer level can be adjusted from 00 to 12.
The Subwoofer level control is only effective when the unit is connected to an optional
subwoofer.
The Sub-woofer level control option will only appear in the Audio Menu if the “Sub-woofer”
function is activated by pressing and holding the “Sub-w” button on the control panel.
SUB-W LPF (Sub-woofer Low Pass Filter)
The Subwoofer Low Pass Filter can be adjusted to 80, 120 or 160 Hz.
iX-BASS (iX-Bass Level)
The iX Bass boost can be adjusted to Low, Mid or High setting.
BASS (Bass Level)
The Bass level can be adjusted from -6 to +6.
BASS -CFQ (Bass Center Frequency).
The Bass CFQ (Center Frequency can be adjusted between 60, 80, 100 and 200Hz.
The iX-Bass option will only appear in the Audio Menu if the function is activated by
pressing and holding the “iX-Bass” button on the control panel.
P. 13
BASS-Q: (Bass Quality Factor)
The Bass-Q (Bass Quality Factor) can be adjusted as shown in Fig 1.
Figure 1
shows the Bass Quality factor (Curve characteristics) of each step.
MIDDLE (Middle Level)
The mid-range setting can be adjusted from -6 to +6.
Level
(dB)
Frequency (Hz)
15.0
12.5
10.0
7.5
2.5
0.0
5.0
10.0
100.0
1.0K
10.0K
2W
1W
1N
2N
Figure 1
MID-CFQ (Middle Center Frequency)
The MID-CFQ (Middle Centre Frequency) can be adjusted between 500Hz, 1KHz, 1.5KHz
and 2.5KHz.
