Goodman ACVC8 CA Series AMVC8 CA Series, Service And Troubleshooting

Page: 46 / 53

Name/Cloud/Phone App 7 Segment Display User Modifiable Options Comments
Cool Trim Factor

-10%, -8%,-6%, -4%, -2%, 0%, 2%, 4%, 6%, 8%,10% Trims the cooling airflow by the selected amount.
Cool Airflow Profile

A, B, C, D Select cooling airflow profiles.
Cool On Delay
d
5, 10, 20, 30 Selects the cooling on delay.
Cool Off Delay
d
30, 60, 90, 120 Selects the cooling off delay.
Dehumidifcation Enable
dE
ON, OFF Enables the dehum function for OD operation.
Defrost Gas Heat Stage
d
1 or 2 Selects the gas heat stage for defrost operation.
Compressor Balance Points

Adjustable and defined in Shared Data Selects the compressor balance point options for HP operation.
HP Trim Factor

-10%, -8%,-6%, -4%, -2%, 0%, 2%, 4%, 6%, 8%,10% Trims the heating airflow by the selcted amount
HP On Delay
d
5, 10, 15 Selects the HP heating on delay.
HP Off Delay
d
30, 50, 70, 90 Selects the HP heating off delay.
HP Defrost Interval
dI
30, 60, 90, 120 Provides the defrost options for compressor heating operation.
Compressor Delay
dL
0, 5, 15, 30 Provides the compressor delay options for heating operation.
History Fault and Clear
L
Yes or No.
Views the comm outdoor history and clear the outdoor unit
history fault.
Name/Cloud/Phone App
7 Segment Display
User Modifiable Options
Comments
Boost Mode

On or Off Provides the options for inverter boot operation.
Boost Temp

On(Always), 70F, 75F, 80F, 85F, 90F, 95F, 100F, 105F Provides the 9 temperature options for boot operation.
Set Max Current

OFF, 40%, 50%, 60%, 70%, 80%, 90% Selects Max Current options
Vertical Rise


SL (Same Level), OL (Outdoor Lower), IL (Indoor
Lower)
Selects the level of outdoor vas indoor equipment.
System Reset Menu

Yes or No. Reset all outdoor unit settings to factory default.
System Verification Test



On or Off Runs System Verification Test after Installation.
Pump Down
d
On or Off Enters Pump Down mode.
Charge Mode

On or Off Enters charge mode.
Cool-Trim Factor - High

-15, -12, -9, -6, -3, 0, 3, 6, 9, 12, 15 Trims the cooling airflow by the selected amount.
Cool-Trim Factor - Intermediate
I
-15, -12, -9, -6, -3, 0, 3, 6, 9, 12, 15 Trims the cooling airflow by the selected amount.
Cool-Trim Factor - Low
L
-15, -12, -9, -6, -3, 0, 3, 6, 9, 12, 15 Trims the cooling airflow by the selected amount.
Cool Airflow Profile

A, B, C, D Select cooling airflow profiles.
Cool On Delay
d
5, 10, 20, 30 Selects the cooling on delay.
Cool Off Delay
d
30, 60, 90, 120 Selects the cooling off delay.
Dehum Enable
dE
On or Off Enables the dehum function for compressor operation.
Cool Reset Menu
L
Yes or No. Resets all cooling settings to factory default.
Cool Max RPS Range

01(58 to 62.5 RPS), 02(63 to 67.5 RPS), 03(68RPS),
04(68.5 to 73 RPS), 05(73.5 to 78 RPS)
Selects the appropriate range for the installed system
configuration.
Cool Max RPS Selection

10 RPS values from inverter
Selects the appropriate compressor RPS for the installed system
configuration.
Defrost Gas Heat Stage
d
1 or 2 Selects the gas heat stage for defrost operation.
Compressor Balance Points

Adjustable and defined in Shared Data Provides the compressor balance point options for HP operation.
Force Defrost
dd
On or Off
HP Trim Factor - High

-15, -12, -9, -6, -3, 0, 3, 6, 9, 12, 15 Trims the heating airflow by the selected amount.
HP Trim Factor - Intermediate
I
-15, -12, -9, -6, -3, 0, 3, 6, 9, 12, 15 Trims the heating airflow by the selected amount.
HP Trim Factor - Low
L
-15, -12, -9, -6, -3, 0, 3, 6, 9, 12, 15 Trims the heating airflow by the selected amount.
HP On Delay
d
5, 10, 20, 30 Selects the HP heating on delay.
HP Off Delay
d
30, 60, 90, 120 Selects the HP heating on delay.
HP Defrost Interval
dI
Maximum amount of compressor runtime before
defrost occurs.
Provides the defrost options for compressor heating operation.
HP Reset Menu

Yes or No. Resets all heating settings to factory default.
HP Max RPS Range

01(58 to 62.5 RPS), 02(63 to 67.5 RPS), 03(68RPS),
04(68.5 to 73 RPS), 05(73.5 to 78 RPS)
Selects the appropriate range for the installed system
configuration.
HP Max RPS Selection

10 RPS values from inverter
Selects the appropriate compressor RPS for the installed system
configuration.
History Fault and Clear
L
Yes or No.
Views the comm outdoor history and clear the outdoor unit
history fault.
ClimateTalk Comm Outdoor 2-Stage AC/HP
ClimateTalk Comm Outdoor Inverter AC/HP
TROUBLESHOOTING
46