User Manual
22
1.
Remove the plastic covers.
2.
Before drilling, attend to live
cables
or
other
lines
lying
behind plaster, and do not
damage
them.
3.
Use a spirit level to mark the
drill
holes
on
the
wall.
Fig. 10:
Aligning and marking
4.
Mark the drill holes 1 to 6 with
a pencil.
Use the TV wall mount (A) as
template.
5.
Drill the drill holes with a
10 mm concrete drill 60 mm
deep.
Fig. 11:
Drilling holes
6.
Plug a concrete anchor (W-B)
in
each
drilling
hole.
7.
First, screw the middle, upper
screw
so
that
it
protrudes
approximately
5
mm.
8.
Align the TV wall bracket (A).
9.
Fasten the TV wall bracket (A)
Fig. 12:
Wall mounting
with the remaining wall screws
(W-A)
and
washers
(W-C).
4.3
Mounting the flat screen
Risk of injury by tripping and falling
>>
Place, transport and install product, parts
and acceories in a safe way.
Risk of material damage by improper
procedure
>> Only use moderate force when tightening
the screws in order to avoid damaging
threads.
>>
>>
NEVER set the screen on the front during
installation!
Do not damage the flat screen by too
long screws.
Tab. 18:
Mounting the flat screen
