EN
- 12
WARNING
GOOD HABITS!!
2 - Never leave your Board in direct sunlight.
Excessive
temperature can damage the PVC and increase pressure, risk
breaking welds and causing leaks.
3 - After each use, rinse your Board
in fresh water with the
valve closed and let it dry before storing it in its bag.
4 - Do not leave your Board inflated for long periods
of time.
If you store it, without storing it in its bag, deflate it
slightly to lower the pressure and store it in a clean and dry
place.
1 - When using your Board for the first time, before starting
inflation, use the black key provided in the Repair Kit to check
the tightness of the inflation valve.
Successive inflation/deflation of
your Board can have an influence on the tightness of the inflation valve.
Do not hesitate to carry out this check on a regular basis.
