~7~
Connections
We recommend the highest quality cables for both input and output connections.
1.
Switch off the MX-2003B and all devices that you want to connect.
2.
Connect a monitor, a projector or other displays that comes with DVI and/or VGA inputs by using 1
male-to-male DVI (VGA) cable to MX-2003B DVI output (you can connect 2 displays equipped with DVI and
VGA respectively by a DVI to DVI/VGA breakout cable
(DDVY01)
) .
3.
Plug in DVI to DVI/VGA breakout cable
(DDVY01)
to DVI-IN and plug in VGA to component breakout cable
(VYPBA01)
to the VGA connector of the breakout cable.
4.
Connect a device equipped with DVI output (such as PC) to the DVI connector of the breakout cable.
5.
Connect a device equipped with component video output (YPbPr such as DVD player or camera) to the
3-RCA jack of the
VYPBA01.
6.
Connect a device equipped with VGA output (such as laptop) to the VGA connector of MX-2003B.
7.
Connect a device equipped with composite video output to composite input of the MX-2003B.
8.
Connect your computer with the MX-2003B by a 9-pin RS-232 cable and then install the software.
9.
Plug in power adapter cable into 5V DC power jack.
10.
Switch on all devices connected and then switch on the video processor and then press “menu” to display
OSD menu.
11.
Press down arrow key dropping down sub-menu to select the first channel (Main Channel) video/graphic
source.
12.
Once the Main Channel has a video selected, press “exit” key to exit the sub-menu, and then move right to
the next item of OSD menu, which allows you to select the second channel (Sub Channel).
13.
For detailed IR remote control operation, please refer to the On Screen Display menu and IR operating
instruction.
