~14~
g.
Factory Reset:
This will restore all the system values back to the factory default.
h.
Exit:
Quit the software.
Background
a.
Resolution:
Change the output resolution.
b.
Layout:
The preset layout for main & sub
channels.
c.
HFlip:
Horizontally flip the output video.
d.
VFlip:
Vertically flip the output video.
e.
SWAP:
Swap the main and sub channel.
f.
Color:
The background color selection.
g.
Custom Size 1-
3: Save or read main/sub
channel size, position, visible and Layer.
1.
Assign an ID for the connected MX-1003B: type a number in the “ID Number”
of the device ID setting area and then click “Write”.
2.
Read the ID of the connected MX-1003B: click “Read” and the ID will show up.
3.
Super Control: all devices cascaded will receive and respond the same way
when you are operating the control software.
4.
Single Device Control: remove the check beside the “Super Control” and type
a number that represent a specific MX-1003B and then click “Apply”. Exit the
“Device ID Setting” and click “Connect”.
