~11~
System Requirement and Precautions
1.
The MX-1003B provides a software control program which runs under Microsoft Windows 98, 2000, XP
through the interface of RS-232 serial control.
2.
Before you click on the icon of the software, make sure you have secured the connection between your
computer COM port and the MX-1003B and switched on the MX-1003B with green LED light.
3.
The MX-1003B has remote control and software control. To make sure all information shown in the software
is synchronized with those in the device, please click “Connect” to acquire the latest data from the MX-1003B
after you press any key on the remote control.
Instruction of Software Connection
1.
Power up the MX-1003B and you can see both red and green LEDs on the front panel blink. Make sure the
serial port (RS-232) connection secure.
2.
The first step after running the software is to automatically detect if the device responses correctly through
RS-232 port. The process takes 15-20 seconds. If the response is not accurate, a warning window will show
up as the figure below.
The possible reasons causing this failure could be:
The MX-1003B is not supplied with power or the MX-1003B enters deep sleep state. Please check the current
status, and reboot the MX-1003B
The serial connection through RS-232 is not well established or some other software has taken the available
serial ports. Please make sure the RS-232 cable is well connected and the available serial port is free to be used
by the MX-1003B.
Operation Software
