2
INTRODUCTION
The
CV-305P
3G/HD/SD-SDI to HDMI Scaler-Converter
offers the highest compatibility among SDI,
composite, component, DVI, VGA, HDMI and S-Video to HDMI or DVI in the market. This unique device
supports analog and digital conversion and scaling without loss of quality. With the embedded advanced
de-interlacer, interlaced video inputs, such as component, composite and S-Video, can be further
improved.
CV-305P
supports the insertion of stereo analog audio and S/PDIF inputs into HDMI output
with local duplicated outputs! For SDI,
CV-305P
can support up to 8 digital audio channel embedded in
SDI stream and make perfect conversion between SDI and HDMI signals. With this advanced feature,
users can combine asynchronous video and audio sources into the state-of-art HDMI compliant A/V
signal for further long range lossless transmission and high standard A/V experience!
CV-305P
is especially designed to ease the SDI conversion to the common HDMI interface with
affordable cost. With
CV-305P
, SDI will not become a bottleneck in your applications and the handy audio
support can make the input video and audio become HDMI ready. With versatile IR remote control and
push buttons,
CV-305P
offers a very easy way to convert, switch, adjust videos at your convenience. With
PIP and PAP support, users can display two video inputs at the same time!
FEATURES
SD/HD/3G SDI compliant
HDCP 1.1 and DVI 1.0 compliant
Scales up and down VESA compliant formats (VGA and DVI)
Scales SD/ED/HD video inputs to VESA compliant formats
PIP and PAP support
Advanced video processing supports: noise reduction, color management, fleshtone control, dynamic
contrast control, closed caption support for CVBS, 3D de-interlacing, 3:2/2:2 pull down detection and
recovery.
Selectable analog stereo and S/PDIF audio support for HDMI audio
RS-232 Firmware upgradable to guarantee the functionality revised.
Equivalent to 6 different video format switcher to HDMI
Video output supports up to WUXGA, UXGA or 1080p
Supports stereo audio and S/PDIF
Supports 8 channel SDI digital audio
Supports two up to 3G-SDI loop-outs
HDMI / DVI compliant output
Versatile IR control
Push button control
3
SPECIFICATIONS
Model Name
CV-305P
CV-805
Technical
HDMI&HDCP
Compliance
HDMI & HDCP 1.1
Digital video bandwidth
4.95Gbps
Analog video bandwidth
165MHz [Single Link]
Analog audio bandwidth
N/A
20 ~ 20KHz
Maximum resolution
1080p60 / 1920x1200@60
Max. TMDS input clock
165MHz
Max. output pixel clock
165MHz
Input TMDS signal
1.2 Volts [peak-to-peak]
Input DDC signal
5 Volts [peak-to-peak, TTL]
SDI Support
SD/HD/3G
N/A
Input
1x HDMI + 1x CVBS + 1x S-Video +
1x VGA + 1x YPbPr + 1x DVI +
1x S/PDIF + 1x 1 x SDI
1x HDMI + 1x CVBS + 1x S-Video +
1x VGA + 1x YPbPr + 1x DVI +
1x S/PDIF + 1x Stereo
Output
1x HDMI + 1x S/PDIF + 1x
2x SDI
1x HDMI + 1x S/PDIF + 1x Stereo
PIP / PAP
YES
Audio support
8CH SDI Audio / Stereo (24 bit ADC)
/ S/PDIF
Stereo (24 bit ADC) / S/PDIF
S/PDIF support
48KHz
ESD protection
[1] Human body
— ±19kV [air-gap discharge] & ±12kV [contact discharge]
[2] Core chipset
— ±2kV
PCB stack-up
6-layer board [impedance control
— differential 100
; single 50
]
IR remote control
Electro-optical characteristics:
= 25
/ Carrier frequency: 38KHz
DVI connector
DVI-I [29-pin female]
RS-232 connector
DE-9 [9-pin D-sub female]
RCA connector
9 pin S-Video, CVBS, and S/PDIF
BNC connector
75
inter-locked socket
3.5mm connector
Earphone jack for analog stereo audio or IR cable
DIP switch
Restore default
