14
FIRMWARE UPDATE PROCEDURE
Software Interface:
1024
bytes as the default.
Please check all the power and serial port connection to
avoid any further unexpected damages during firmware
update. Check
“
Agree
” to enable the firmware update
procedure.
Execute
firmware update.
ComPort Settings:
Select ComPort of PC
connected to the device.
Push
“auto scan” to start the
automatic scan on each
ComPort.
BaudRate is default as
115200
.
15
Window Messages
The connection is not correct. Please check:
Power
Cable
Baud Rate
The whole firmware update procedure fails. Please check
Power
Cable
Baud Rate
The firmware update procedure requires a power cycle.
Please turn off the device, wait for a couple of seconds,
and power on the device.
Congratulations. The whole process is successfully
completed!
