Golz FS 240 SE, Operating Instructions Manual

Page: 21 / 47

FS 240 SE
Operating instructions
- 21-
02822410998
5006580-00
7. Troubleshooting
Attention: In the event of changes in the behaviour of the machine during operation,
stop the machine immediately and report the malfunction to the competent authority
/ person!
Problem Cause Remedy
Engine
Engine does not run!
Power plug is not properly
connected
Check for correct connection
Fuses (from ACS or machine) have
triggered
Check fuses
Malfunction on electric installation
Electric installation needs to
be checked by a qualified
person
Lowering
Joint cutter can neither be
lowered nor be raised Undercarriage or threaded spindle
tight.
Check undercarriage and
threaded spindle
Cutting
Machine rises out of cut
Dull diamond blade
Sharpen or use softer
diamond blade
Feed too high Reduce feed
Non circular abrasion of the
diamond blade
Damaged centering of the blade
shaft
Replace blade shaft
Warped blade shaft Replace
Loose or damaged blade shaft
bearings
Tighten or replace
Diamond blade jams in the cut
No free cut because of sideward
wear-out of segments
Check hoses for fracture free
laying
Damaged diamond blade core Replace diamond blade
Abnormal wear-out of
segments
Insufficient water flow
Check hoses for fracture free
laying
Wrong type of diamond blade
Choose different diamond
blade
Feed too high Reduce feed
Cutting in loose underground Reduce cutting depth
Bad cutting performance
Slippy V-belts Adjust
Blunt diamond blade
Sharpen or use softer
diamond blade