INTRODUCTION
First and foremost we would like to thank you for purchasing this product.
Our commitment to satisfying our customers can be seen from our ISO-9001 certification and from the manufacturing of
products like this one.
Its advanced technology and exacting quality control will ensure that customers and users enjoy the many features
this system offers. To obtain the maximum benefit from these features and a properly wired installation, we kindly
recommend that you spend a few minutes of your time reading this manual.
CONTENTS
2
SAFETY PRECAUTIONS
-
Always disconnect the power supply
before making modifications to the device.
-
The fitting and handling of these devices must be carried out by
authorised personnel.
-
The wiring must run at least
40cm away from any other wiring.
-
Do not overtighten the screws on the terminal block.
-
Install the SAR-GB2 relay unit in a dry and protected location free from the risk of dripping or splashing water.
-
Install the SAR-GB2 relay unit and SAR-12/24 together with the FA-GB2A power supply unit.
-
Do not place in humid, dusty or smoky locations, or near sources of heat.
-
The maximum consumption of relay contacts shall not exceed from 2A to 30 Vdc/ 1.25A to 48 Vac.
-
Before connecting the system to the mains, check the connections.
-
.
Always follow the instructions contained in this manual
Introduc
....................................................................................................................................................................2
tion
Contents........................................................................................................................................................................2
.
Safety precautions
........................................................................................................................... .................2
.............
.
Characteristics
...............................................................................................................................................................2
Operating modes
..............................................................................................................................................
3
.............
.
Description of SAR-GB2 relay unit
...................................................................................................................................
.
Description
.......................................................................................................................................................... .......4
.
.
Installation
................................................................................................................................................................... ...
.
.
Detail of the installation of the SAR-GB2 relay unit
....................................................................................................... 4
.
Operating mode configuration
......................................................................................................................
5
...............
.
Operating mode description “Lock release relay”
...........................................................................................
5
..............
.
Assigning of door panel and lock release control 1 or 2
.............................................................................................. 5
.
Relay unit lock release activation time
....................................................................... ......6
..........................................
Operating mode description “Stairs light activation relay”
..................... ..................................................... .7
.... ..............
.
Relay unit light activation time
..........................................................................................
7
.........................................
.
Wiring diagrams
................................................................................................................................................. .
.............
Stairs light activation relay
.................................................................................................................................... .... 8
...
.
Additional lock release activation relay
.........................................................................................................................8
Not s.............................................................................................................................................................................9
e
.
CHARACTERISTICS
-
Digital relay for the
system, allows the following operating modes:
GB2
O
Stairs light activation relay (necessary module SAR-12/24).
O
Golmar additional alternating lock release relay (necessary power supply unit TF-104).
-
.
Necessary to configure operating mode of the SAR-GB2 relay unit
-
.
Connects to the Bus
panel
door
-
.
Configuration DIP switch
-
.
Operating status LEDs
-
The maximum consumption of relay contacts will be from 2A to 30 Vdc (40w) / 1.25A to 48 Vac (40w).
-
12Vdc output to activate SAR-12/24 module in operating mode “stairs light activation”.
RELAY UNIT TSAR-GB2
