7
IP G+
www.golmar.es
CLIENTE WEB EL632/G+/48
3.3.2. SIP servers
In the SIP servers section we will be able to add the device in a PABX telephone switchboard in order to receive calls using an extension
through the switchboard. The steps to follow to add the device in a switchboard are shown below:
We will connect the PABX telephone switchboard
to our network through the LAN output of the
switchboard. In this way, we will be able to access its
web client and set an IP range of the WAN output of the
switchboard. which is where we will connect it to our
system for its operation.
In our web browser we will type the IP address of the
LAN network of the switchboard.
1
Will ask us for our credentials in order to access. In the back of the PABX
appears the user, that usually is “admin” and the password.
In this example we will use the UCM6202 PABX. Other switchboards can differ in terms of its programming. See the manual of your
switchboard.
IP POR DEFECTO DEL TELÉFONO
Type the current IP address of the telephone in the web browser:
Save the changes and reboot the telephone.
Access to the network section and modify the IP and the Gateway
.
IP POR DEFECTO DEL TELÉFONO
Access with the manufacturer credentials.
3 - Modify the IP address:
IP range 10.XX.XX.XX
Gateway 10.0.0.1
4 - Add the telephone to the system:
Access to “devices” section of the management panel (described above in this guide):
Push buttons
SIP servers
GMS
Press on
“add SIP device”
.
Telefono voIP
IP address
10.128.1.150
0
0 IP - 1 to 30 SIP server
Name to identify the device.
Block associated with the device.
Address call assigned to the device.
Conection “0” by IP address
.
Add.
Device IP address.
In this moment the telephone is added and it appears in the devices list, in this example belongs to the block 1.
In case of a call to the address 10 we would establish communication. We will be able to open the relays 1 and 2 through #1 and #2
respectively during communication.
In this guide has been used the Grandstream GXP1610 model. The following describes how to modify its IP address:
