11
IP G+
www.golmar.es
CLIENTE WEB EL632/G+/48
Configuration
Selection to mark
Resolution
640 x 480 (máx)
FPS
25
Compression
H.264
Codification type
Baseline
Bit Rate type
CBR
Bit Rate
512
I frame interval
20ms
5 - Set the following substream configuration:
NOTE: It is possible that in some moment the web browser indicates that is required to install “plugins”, if it is the case you must install
them and reboot the web browser. If you change the access credentials, keep them in mind, as they are necessary to register the camera in
the system.
6 - Register the configurated camera in the system:
Access the “devices” section of the management panel (described above in this guide):
Push buttons
SIP servers
GMS
Click on
“add Camera”
admin
admin
10.128.0.125
Cámara 1
Name to identify the camera
Camera IP address
Camera credentials
4 - Modify the IP address.
The Gateway IP address should become
10.128.0.1
The camera IP address will have
to be changed to a value between
10.128.XX.XX and 10.254.XX.XX.
If the configuration of the IP addresses of the system
is automatic, use this recommenden parameters. If the
cameras IP addresses are given in other range, you can
configure the system IP addresses in manual mode.
