ARF® MODEL
3.4 After installing the elevator, use supplied balsa pieces to fill gap behind the elevator as shown
below
3.5 Locate the slots for elevator servo, remove covering. Connect wire extension to your servos
before feeding the wire into fuselage. Install servo with screws supplied by servo manufacturer.
3.6 Use your radio to set the servo center position and install the large control horn onto the servo.
Assemble the control rod and ball links and adjust the control linkage for proper geometry.
When satisfied, screw the ball link to the servo arm and control horn. KUZA 1.25” aluminium
CNC servo arm is recommended for elevator control, the servo arm should be as close to
perpendicular to the control rod as possible while the elevator is at neutral. Double check all
screws, bolts and nuts to assure proper installation and operation without binding.
Summary of Contents for YAK 55M 70 E
Page 1: ...ARF MODEL 60in YAK55M 70 Electric Electric Extreme Series Instruction Manual ...
Page 7: ...ARF MODEL Honeycomb Board carton packing for safer transportation Scheme A White red blue ...
Page 31: ...ARF MODEL KUZA new Wingbag for 70E Two color to choose orange silver blue silver No KAG0091 ...
