ARF® MODEL
1.4 Fill the slot and coat the root of control horn and the bottom of base plate with 30 minute epoxy,
insert the horn into the slot, press it down firmly. Wipe off excessive epoxy with alcohol wipes.
Set aside until cured.
1.5 The slots for CA hinges are pre-cut. Insert CA hinges half way into the hinge slots on aileron,
apply a drop of thin CA to secure the hinges. Then insert all hinges into slots on the wing at
once, align aileron with the wing, move the aileron up and down a few times to reach the
minimal hinge gap while still allowing full deflection of the aileron. When satisfied, apply
more think CA on both top and bottom sides of each hinges.
1.6 Cut the covering from the aileron servo slots from corner to corner and iron down inside the
openings. Connect servo wire extensions to your servos and secure the connections with the
supplied clips. Feed the servo wires into the wing and out the root. The screw holes for servo
Summary of Contents for YAK 55M 70 E
Page 1: ...ARF MODEL 60in YAK55M 70 Electric Electric Extreme Series Instruction Manual ...
Page 7: ...ARF MODEL Honeycomb Board carton packing for safer transportation Scheme A White red blue ...
Page 31: ...ARF MODEL KUZA new Wingbag for 70E Two color to choose orange silver blue silver No KAG0091 ...
