All contents copyright 2014, GoldWing RC Version 2.0, Feb 2014
5. Assemble the throttle servo mount using the supplied laser cut parts or there is a servo cutout in the
bottom of the engine box for 50cc-70cc engines. Mount your throttle servo and complete your linkage setup.
A hole will need to be drilled on the firewall to allow the pushrod to connect to the throttle arm on the carb.
6. An extra servo can be fitted for choke or a mechanical linkage can be used.
7. The fuel tank is preassembled. Complete the installation in the fuselage using zip ties or velcro straps to
hold the tank in position. Connect a fuel line between the tank and carb, a fuel line between the tank vent
and the bottom of the fuselage, and a fill line to a fueling port which can be mounted on the fuselage side
opposite your ignition switch. Make sure your vent line does not come close to any hot exhaust part such as
the muffler or canister. GW recommends the use of small zip ties or fuel line clamps to secure the lines to the
tank.
