5. MAINTENANCE & CLEANING
Cleaning
Cleaning Guidelines
Caution:
ALWAYS TURN OFF THE POWER SUPPLY BEFORE CLEANING.
THIS UNIT IS NOT WATER
PROOF. DO
NOT USE WATER JET SPRAY TO CLEAN
INTERIOR OR EXTERIOR OF THIS UNIT.
Exterior
Clean with a good quality stainless steel cleaning compound. Harsh abrasive cleaners may
damage the surface.
Interior
Ensure that the oven chamber is cool. Do not use wire brushes, steel wool or other
abrasive materials. Clean the oven regularly with a good quality oven cleaner. Take care
not to damage the fan or the tube at the right side of the oven which controls the
thermostat.
Oven Racks
To remove, slide out to the stop position, raise the front edge up, and lift out.
Side Racks
Undo the thumbscrew (anti-clockwise rotation) securing rack to oven wall, swing rack
towards centre of oven to disengage location pin at front of side, and pull rack forward to
remove. To replace, engage rack in rear holes, swing towards side of oven to engage in
front hole, and replace thumbscrew.
Bottom Element Cover
Lift out vitreous enamelled element cover and thoroughly clean on a routine basis
(minimum once per week).
NOTE: Do not place trays or foil on top of element cover.
Fan Baffle
To remove, unscrew the oven lamp glass and lift the baffle out. To replace, locate the
bottom edge of the baffle over the bottom element terminal plate and secure in place with
the oven lamp glass.
Do not over tighten lamp glass.
Oven Seals
To remove, hold at their centre point and pull forward until they unclip. Remove side seals
first, then
top and bottom. The seals may be washed in the sink, but take care not to cut or damage
them.
To replace, have the lip facing the oven opening. Fit the top and bottom seals first, then
the side seals.
Oven Door Glass
Clean with conventional glass cleaners
IMB084B1/P10
