12
13
84
6
33
93
98
84
93
5
3
102
90
13
84
79
12. Insert a Guide Cap (33) upward into a Side Top
Frame (13). Set the Side Top Frame on the left
Weight Bar Guide (5) and insert it into the Left
Support (6).
Attach the Side Top Frame (13) to the Left
Upright (3) and the Left Support (6) with two
M10 x 76mm Button Bolts (102), two M10 x
25mm Button Screws (98), four M10 Split
Washers (93), and four M10 Washers (84).
Do
not tighten the Button Screws yet.
Repeat this step with the other Side Top
Frame (13) and the right side of the weight
rack.
13. Insert an M10 x 67mm Button Bolt (90) through
the Left Upright (3) and the Side Top Frame
(13). Hand tighten an M10 Washer (84) and an
M10 Locknut (79) onto the Button Bolt.
Repeat this step with the other Side Top
Frame (13) and the right side of the weight
rack.
3
14. Orient the Center Top Frame (14) so that the
decal is in the position shown.
Make sure that
the Guide Cap (33) is inside the left Side Top
Frame (13).
Attach the Center Top Frame (14) to the Side
Top Frame (13) with two M10 x 93mm Button
Bolts (97), two 17mm Spacers (66), two M10
Washers (84), and two M10 Locknuts (79).
Do
not tighten the Locknuts yet.
Repeat this step with the right Side Top
Frame (not shown).
97
14
13
33
66
79
84
97
Decal
66
13
12
14
Summary of Contents for Platinum GGBE6958.1
Page 37: ...37 NOTES ...