23
50. Route the Long Cable (54) through the Right
Upright (4) and a Swivel Arm (32). Then, route
the Long Cable over a 90mm Pulley (58). Attach
the 90mm Pulley inside the Swivel Arm with an
M10 x 53mm Button Bolt (147), two M10
Washers (84), two 6mm Spacers (75), and an
M10 Locknut (79).
51
54
52
80
53
147
84
75
75
50
84
79
58
54
32
4
54
58
13
104
63
79
49. Route the Long Cable (54) over a 90mm Pulley
(58). Attach the 90mm Pulley and a Small Cable
Trap (63) to the right Side Top Frame (13) with
an M10 x 49mm Button Bolt (104) and an M10
Locknut (79).
Make sure that the Small Cable
Trap is oriented to hold the Long Cable in
the groove of the 90mm Pulley.
29
86
89
52
8
52. Attach the Upright Backrest (29) to the Backrest
Upright (8) with two M6 x 67mm Screws (89)
and two M6 Washers (86).
51. Slide a Cable Stop (52) onto the Long Cable
(54).
Hold an M6 Locknut (80) inside a Clip (53), and
insert the Long Cable (54) into the Clip and the
Locknut. Hold the crimp on the Long Cable with
a pair of pliers. Insert a screwdriver between the
Locknut and the Clip. Rotate the screwdriver,
the Clip, and the Locknut together until two
threads of the Long Cable show past the
Locknut.
Slide the Cable Stop (52) over the Clip (53).
49
Summary of Contents for Platinum GGBE6958.1
Page 37: ...37 NOTES ...
