13
24. Press a 48mm Round Inner Cap (68) into a Top
Storage Tube (60).
Attach the Top Storage Tube (60) to the indicated
Rear Upright (9) with two M10 x 78mm Bolts (51),
two M10 Washers (32), and two M10 Nylon
Locknuts (47).
Assemble the other Top Storage Tube (60) in
the same manner.
26. Wet the ends of the Lat Bar (56) with soapy
water. Slide a Handgrip (57) onto each end of the
Lat Bar.
Press two Adapter Bushings (30) into the Olympic
Adapter (16).
27. Make sure that all parts are properly tightened
before you use the weight bench. The use of
all remaining parts will be explained in
ADJUSTMENTS, starting on the next page.
25. Press a 25mm Round Inner Cap (50) into the Left
Weight Rest (72).
Insert the Left Weight Rest (72) into the left Front
Upright (8) and engage the locking pin around the
Upright.
Assemble the Right Weight Rest (not shown)
in the same manner.
24
25
26
32
9
51
32
68
60
8
30
30
56
16
57
57
50
47
47
72
Pin
